Miscellaneous - Mitsubishi Electric Q172CPU Programming Manual

7 MOTION PROGRAMS FOR POSITIONING CONTROL

7.16 Miscellaneous

[ ]
#
IF
GOTO
/
G
M
Axis
command
Feed
O
N
( )
IF
ELSE
END
WHILE
DO
The settable arguments in the first character are shown in Table 7.5 below.
Table 7.5 Argument List
Logical Assignment
Operator
operator
GOTO G
(=)
7 - 129
M Remarks
Depends on the data after "/".
Refer to Section 7.13.
Refer to Section 7.15 for M00,
M01, M02, M30, M98, M99
and M100.
Depends on the G-code in the
modal group (01).
Depends on the G-code in the
modal group (01).
Regards the line number and
later as the fist character.
Handles data between "(" and
")" as a comment.
: May be specified.
: Must be specified.
Blank : Must not be specified.