Boot Manual - Cisco ME 3400 Command Reference Manual

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

boot manual

Use the boot manual global configuration command to enable manually booting the switch during the
next boot cycle. Use the no form of this command to return to the default setting.
Syntax Description
This command has no arguments or keywords.
Defaults Manual booting is disabled.
Command Modes Global configuration
Command History Release
12.2(25)EX
Usage Guidelines The next time you reboot the system, the switch is in boot loader mode, which is shown by the switch:
prompt. To boot the system, use the boot boot loader command, and specify the name of the bootable
image.
This command changes the setting of the MANUAL_BOOT environment variable. For more
information, see
Related Commands Command
show boot
OL-9640-10
boot manual
no boot manual
Modification
This command was introduced.
Appendix A, "Cisco ME 3400 Ethernet Access Switch Boot Loader Commands."
Description
Displays the settings of the boot environment variables.
Cisco ME 3400 Ethernet Access Switch Command Reference
boot manual
2-25