Entering Configuration Data
Library Worldwide ID
When a library has a Fibre Channel interface, the library's worldwide ID
identifies the library as a node on the Fibre Channel network. The ID is
automatically displayed when you access the Fibre Channel Interface
Configuration Menu. It cannot be changed.
Network Gateway
A network gateway in a large network allows devices on one subnet to
interface with devices on another subnet. This is a four-byte address and must
be specified by the system administrator.
When Done
After you have completed the network configuration:
• If you have not changed the library's network and DNS configuration and
you are not setting other configuration values, press the
you exit all menus.
• If you have already changed the library's network configurations, SCSI ID or
Port 0 address, and you are planning to exit the Main Configuration Menu at
this time, press
• If you wish to set other configuration values, continue with
on page
5-20
.
RESET
5-21.
Eleventh Edition
StorageTek Proprietary
button until
MENU
"Drive Entries"
95896