5: Configuring The Subsystem; Chapter 5, Configuring The Subsystem - StorageTek L180 Installation Manual

Configuring the Subsystem
This chapter describes how to configure the L180 Tape Library and its
associated tape drives for operation.
Configuration data consists of library settings, client network connections, along
with the number and types of tape drives. The library and its associated drives
must be configured:
• During installation
• When the MPC/MPCL card is replaced
• When a drive is added to or removed from the library
Note: Microcode is factory-installed on all new machines and resides within a
Before starting the configuration procedure:
1. Read the sections describing the entries.
2. Determine your choices and write your configuration information in
Table 5-1 on page 5-2
3. Make a copy of this information and keep it for future reference.
95896
Flash PROM on the MPC/MPCL card. For new installations, a diskette or
CD with current microcode is also provided. See
Microcode" for instructions about how to download microcode if
necessary.
and
Eleventh Edition
StorageTek Proprietary
Table 5-2 on page 5-3.
5
Appendix B, "Loading
5-1