StorageTek L180 Installation Manual page 32

Tape library
Hide thumbs Also See for L180:
Table of Contents

Advertisement

Rack Safety and Precautions
• Ensure that the equipment has UL listing (listing by Underwriters'
Laboratories), CSA certification (certification by the Canadian Standards
Association), and CE compliance (compliance with the European Council's
directives and standards).
• Understand that the library does not supply power to the rack area. So
ensure that the rack-mounted equipment has an adequate power source.
Note: If you remove power from the library by using the library's power
• Follow the manufacturer's guidelines to position, to support, and to fasten
the equipment in the rack.
• Locate the equipment so that it does not block or hinder any ventilation
openings in the library's rack area. For example, do not block library or
drive exhaust areas, the electronic module exhaust area, perforated metal,
or other similar ventilation.
• Locate the equipment so that the library's doors adequately clear the
equipment when you close them.
• Install the equipment from the bottom of the rack to the top of the rack;
StorageTek recommends that you place the heaviest items near the bottom
of the rack.
• Ensure that the equipment in the rack does not create an overcurrent
condition, whether equipment is connected directly to the branch circuit or
to a power distribution strip.
• Ensure that the equipment in the rack has reliable earth ground, whether
equipment is connected directly to the branch circuit or to a power
distribution strip.
• Ensure that any equipment that you place within the rack is adequately
cooled. The library's internal ambient temperature should not exceed the
recommended operating temperature.
Base cooling considerations upon the power dissipation within the rack
space as well as upon the ambient room conditions that are external to the
library. You must provide cooling for moderate power dissipation within the
rack space.
Note: The following figures outline some temperature recommendations:
xxx
switch, the rack-mounted equipment will remain powered on.
Eleventh Edition
StorageTek Proprietary
95896

Advertisement

Table of Contents
loading

Table of Contents