68-Pin MD to 68-Pin Mini-Centronics Connector
When connecting to a RISC System/6000 or other system that uses a 68-pin
mini-Centronics connector, you must use one of these cables:
• Part 10083388, a 12 m (39.4 ft) cable for above-floor installation
• Part 10083397, a 12 m (39.4 ft) cable for plenum installation
Figure 7-4. 68-Pin Mini-Centronics Connector (C67280)
Special SCSI Adapter Cables
To adapt a 50-pin HD, latch block and rail, to fit a 68-pin connection, use a 3 m
(10 ft) HD 50-to-68 pin Sun/SPARC latch, block and rail adapter (see
part number 10083522
Figure 7-5. 50-Pin to 68-Pin Latch, Block and Rail Connector Adapter (C67062)
95896
Eleventh Edition
StorageTek Proprietary
Connecting the SCSI Interface
C67280
Figure
C67062
7-5)
7-5