Ser1 Port; Modem Setup; Table A-1. Ccitt Cables - StorageTek L180 Installation Manual

SER1 Port

SER1 Port
The communication for the SER1 port must be set to:
-
-
-
-
Note: *A 10-foot CCITT cable (with RJ-45 connector) and an RJ-45–DB9

Modem Setup

To do a remote hookup, you will need:
• An auto-answer modem with all the proper regulatory approvals for the
country in which it will be used
• A CCITT cable with RJ-45 connectors
• A serial device or laptop computer. Either device must:
-
-
CCITT modular cable assemblies are available for connecting the adapter to the
Machine Activated Routing Switch (MARS).
Table A-1

Table A-1. CCITT Cables

Part Number
4108289-02
4108289-05
4108289-20
4108289-25
4108289-30
4108289-25
A-2
38,400 baud
Eight data bits
No parity bit
One stop bit
adapter are included in the library's shipping kit or you can use the CSE
DOS Diagnostic cable (PN 24100134).
Support dumb terminal mode
Use a standard modem communication utility
lists the StorageTek part numbers of the cables you can order.
Length
Meters
6 m
15 m
30 m
45 m
60 m
75 m
Eleventh Edition
StorageTek Proprietary
Feet
19 ft
50 ft
100 ft
150 ft
200 ft
250 ft
95896