Storagetek's L-Series Library Admin - StorageTek L180 Installation Manual

setting will allow time to obtain a replacement cleaning cartridge. For example,
if the maximum warning count equals 20 uses, you may want to set the
warning count to 17 (or other, lower number).
Advise customers to always replace a used cleaning cartridge with a new,
unused cleaning cartridge.
Note: You should periodically check the status of the cleaning cartridges.
To set the cleaning cartridge warning count:
1. Press the
appear.
2. Press the arrow button until the cursor lines up with CLEANING INFO.
3. Press the
The CLEANING INFO screen will appear. It displays the number of
cleaning cartridges in the reserved area.
4. Press an arrow button until the cursor is at the appropriate cleaning
cartridge's WARNING COUNT.
5. Press the
An editing screen will appear. The editing screen will display the current
setting for the cartridge warning count. The maximum warning count is
shown below the current setting.
The warning count should never exceed the maximum warning count
displayed on the operator panel.
6. Press the arrow buttons to change the warning count.
7. Press the
Press the
8. Press the

StorageTek's L-Series Library Admin

Before the customer can use the L-Series Library Admin to monitor the library
or alter the library's configuration, you must enter two values at the operator
panel:
• The library's IP address
• The library's Web password
For instructions on how best to make these entries, see the documentation
included in the L-Series Library Admin shipping package. For instructions on
using the interface to alter the library's configuration or monitor library activity,
access the online help files for the L-Series Library Admin. See
"Library Admin"
95896
button on the operator panel. The main menu screen will
MENU
SELECT button.
button for your choice.
SELECT
button to save the changes.
SELECT
button to abort.
MENU
MENU button to return to the library status screen.
for Library Admin information.
Eleventh Edition
StorageTek Proprietary
StorageTek's L-Series Library Admin
Appendix C,
5-27