Date And Time; Auto Clean Enabled Or Disabled - StorageTek L180 Installation Manual

Tape library
Hide thumbs Also See for L180:
Table of Contents

Advertisement

Date and Time

The library saves the current date and time in non-volatile memory.
To set this value:
1. At the Lib Config Menu, press an arrow button to underscore:
DATE or TIME
2. Press the
3. On the editing screen:
-
-
-
4. When the screen displays the desired setting: Press the
the right-most field to save the changes. Press the
left-most field to abort.

Auto Clean Enabled or Disabled

Auto Clean is an option that:
Enabled:
Disabled:
Note: Make sure that the customer's software supports the Auto Clean option.
There are two ways to enable Auto Clean:
• Manually load valid cleaning cartridges into any of the 11 cells that are
reserved for cleaning and diagnostic cartridges.
• Import valid cleaning cartridges into the reserved cell through the CAP.
The Auto Clean feature is automatically enabled if you load even one cleaning
cartridge into the reserved cell area.
95896
button. An editing screen appears.
SELECT
Use the
and
UP
DOWN
Use the
button to move right to the next field.
SELECT
Use the
button to move left to the previous field.
MENU
When a drive requires cleaning, the robot will retrieve a
compatible cleaning cartridge from the reserved cell in the
library and mount it into the drive. When the cartridge
dismounts, the robot will return the cleaning cartridge to its
cell location within the library. The MPC/MPCL card will keep
track of usage and post an FSC in the log when the warning
threshold has been reached.
When a drive requires cleaning, the operator must enter the
compatible cleaning cartridge into the CAP, using the Clean
Drive routine. The robot will retrieve the cartridge, mount the
tape into the drive, and return the cartridge to the CAP when
cleaning is complete. The operator must then remove the
cleaning cartridge from the CAP and manually keep track of its
usage.
Eleventh Edition
StorageTek Proprietary
Entering Configuration Data
arrows to select a value for each field.
button from
SELECT
button from the
MENU
5-13

Advertisement

Table of Contents
loading

Table of Contents