Preface; Organization - StorageTek L180 Installation Manual

Preface

This manual describes how to install an L180 Tape Library and its associated
tape drives. This manual is intended for StorageTek and authorized third-party
service representatives who will install the L180 Tape Library.

Organization

The organization of this manual is:
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Appendix A "Remote Setup"
Appendix B "Loading Microcode"
Appendix C "Library Admin"
Appendix D "SNMP"
Appendix E "Specifications"
95896
"About the Library" provides an overview of the library,
describes the components, interfaces, and tape drives.
"Installing the Library"
and installing the library.
"Installing the Tape Drives"
installing tape drives in the library.
"Powering-On the Subsystem"
connecting the power cable and powering-on the library and
tape drives.
"Configuring the Subsystem"
library and tape drives for operation.
"Preparing the Subsystem"
test the library and drives before placing them online.
"Connecting the Interface Cables"
library and tape drive interface cables.
"Placing the Library Online."
provides information about how to setup the
library for remote maintenance.
updating microcode during the installation.
describes the optional software product that
resides internally in the library.
describes the implementation of the Simple Network
Management Protocol (SNMP) for the library.
lists the physical, power, and environmental,
specifications for the library.
Eleventh Edition
StorageTek Proprietary
describes the procedures for unpacking
contains the procedures for
contains the procedures for
describes how to configure the
provides procedures to prepare and
explains how to connect the
contains procedures for loading or
xvii