Positioning the Library
To position the library:
1. Carefully roll the library to its assigned location.
2. Position the library to allow space for maintenance and operator access.
These space requirements are shown in
3. If your installation requires that you have cables routed underneath a raised
floor, make sure the floor cutouts are in the correct positions.
Removing the Shipping Kit
To remove the library accessories kit:
1. Open the rear door by gently pulling on the finger slot.
2. Remove the shipping kit package from the rear of the library's rack area.
3. Remove the library door key (PN 310293301) and the wheel chocks from
the shipping kit.
4. Save the remaining components in the kit for subsequent tasks.
Securing the Library Position
To secure the library position:
1. Make sure you have the four wheel chocks (PN 4048) from the shipping kit.
2. Position a wheel chock perpendicular to each wheel, and slide the chock in
place.
3. Make sure the library does not move from its floor position.
Securing the Library Position for Special Purposes
For those customers who wish to fix a permanent position for the library:
1. Move the library into position and line up the studs from the wheel-
mounting assembly with their position on the floor or platform.
2. Fasten the library to the floor or platform.
95896
Eleventh Edition
StorageTek Proprietary
Positioning the Library
Figure 2-1 on page
2-4.
2-9