Direct Connection; Figure 7-6. Client Cable Connection At Drive Bulkhead - StorageTek L180 Installation Manual

Direct Connection

For installations with direct data path connections:
1. Route the data cable up through the cable access hole in the library floor
near the drive bulkhead.
2. Connect the cable to the appropriate connector at the drive bulkhead.
3. Make sure a terminator is installed.
Figure 7-6. Client Cable Connection at Drive Bulkhead (C67268)
1. Drive SCSI Y-cable
2. Terminator
3. Drive bulkhead
4. SCSI cable (from client)
5. Cable access cutout
95896
1
2
Eleventh Edition
StorageTek Proprietary
Connecting the SCSI Interface
3
4
5
C67268
7-9