Figure 3-5. Ultrium Drives for HVD Operation (C67294)
HP
1. Converter card
2. Converter card
3. Seagate product label
6. To determine the SCSI type of the IBM or the HP LTO drive (the Seagate
drive shows the SCSI type on a label on the unit):
a. Look for a label. If none exists:
b. Disengage the cover from the drive tray assembly by removing its three
c. Remove the cover.
d. Examine the tray area to the rear of the drive to determine if an LVD-to-
95896
1
2
IBM
top screws and two side screws with a Torx T-15 bit.
HVD converter card is present.
Eleventh Edition
StorageTek Proprietary
Installing LTO Drives
3
SEAGATE
C67294
3-9