Removing The Library From The Pallet - StorageTek L180 Installation Manual

Removing the Library from the Pallet

Note: Some shipping agreements require the shipper to remove the library
WARNING:
Heavy load. At least two people are required to remove the library from
its shipping pallet.
AV E R T ISS E M E N T :
CHARGE LOURDE. Deux personnes au moins sont requises pour retirer la
bibliothèque de sa palette de transport.
VO RSIC H T:
HOHES GEWICHT. Um die Library von der Lieferpalette zu heben,
benötigen Sie mindestens einen Helfer.
OS T R Z E Ż E N I E:
DU Ż A WAGA. Co najmniej dwie osoby powinny wyjmowa ć biblio tekę z
palety wysy łkowej.
If you must remove the library from its pallet:
1. Obtain a 3/4-inch (or adjustable) wrench or socket.
2. Remove the four 3/4-inch bolts that secure the library to the pallet.
3. Tilt and remove the four wood blocks positioned near the wheels.
4. See
the ramp with the two posts on the pallet.
5. Securely seat the ramp on the ramp posts.
6. With someone on both sides of the library, carefully guide the library down
the ramp.
7. Remove the ramp and pallet from your work area. You may re-use or
dispose of the shipping materials according to your local policies.
95896
from its shipping pallet. If this is the case, you may skip this section.
Figure 2-3 on page 2-8
Eleventh Edition
StorageTek Proprietary
and position the ramp by aligning the holes of
Unpacking the Library
2-7