UDB-9000 Universal Deck Box - UDB-9000-M (Portable) and UDB-9000-MR (Rack Mount) Configurations
When the window closes, the
status information is displayed in
the Benthos Smart Release/
Modem pop-up along with the type
of modem as shown in Figure 4-27.
If the status information is not
acquired, a no response indication
is displayed in the window.
NOTE For the types of status
information that can be displayed
for a SMART release or modem,
refer to its user's manual.
Releasing a SMART Release or Modem
Before a SMART release or modem can be released, the status information
for the SMART release or modem must first be acquired. Before sending
commands, always ensure that the transducer is connected.
To release a SMART release or modem:
1. Acquire the status information for the SMART release or modem to be
released as described in "Acquiring and Displaying Status Information
from a Remote Modem" on page 4-20.
The Send button becomes available.
2. Determine the release code for the
SMART release or modem.
3. Touch the Release Code setting.
The release code keypad opens as
shown in Figure 4-28.
4. Enter the release code of the
SMART release or modem, five
characters maximum, and then
touch OK. To backspace and
delete a character, touch the
Delete pad.
4
Operation using the Touch Screen Display
Figure 4-27 Displayed Status
Information and Type of SMART
Release or Modem
Figure 4-28 Release Code
Keypad
Releasing a SMART Release or Modem
4-21