Show Platform - Centrecom FS980M/9 Command Reference Manual

S C
WITCHING OMMANDS

SHOW PLATFORM

show platform
Overview This command displays the settings configured by using the platform commands.
show platform
Syntax
Mode Privileged Exec
Usage This command displays the settings in the running config. For changes in some of
these settings to take effect, the device must be rebooted with the new settings in
the startup config.
Example To check the settings configured with platform commands on the device, use the
following command:
awplus#
Output Figure 12-7: Example output from the show platform command
Table 5: Parameters in the output of the show platform command
613-50137-01 Rev A
show platform
awplus#show platform

MAC vlan hashing algorithm
L3 hashing algorithm
stop-unreg-mc-flooding
Vlan-stacking TPID
Hardware Filter Size
Parameter
MAC vlan hashing
algorithm
L3 hashing algorithm
stop-unreg-mc-flooding
Vlan-stacking TPID
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
crc32l
crc32l
off
0x8100
ipv4-limited-ipv6
Description
The MAC VLAN hash-key-generating algorithm (set with
the platform mac-vlan-hashing-algorithm
default algorithm is crc32l. The algorithm may need to be
changed in rare circumstances in which hash collisions
occur.
The L3 VLAN hash-key-generating algorithm (set with the
platform l3-vlan-hashing-algorithm
default algorithm is crc32l. The algorithm may need to be
changed in rare circumstances in which hash collisions
occur.
Whether the stop-unreg-mc-flooding feature is on or off
(set with the platform stop-unreg-mc-flooding
command). This feature prevents flooding of unregistered
multicast packets in the occasional situations in which
IGMP snooping does not prevent it.
The value of the TPID set in the Ethernet type field when a
frame has a double VLAN tag.
command). The
command). The
384