Show Flowcontrol Interface - Centrecom FS980M/9 Command Reference Manual

S C
WITCHING OMMANDS

SHOW FLOWCONTROL INTERFACE

show flowcontrol interface
Overview Use this command to display flow control information.
show flowcontrol interface <port>
Syntax
Mode User Exec and Privileged Exec
To display the flow control for the port1.0.5, use the command:
Example
awplus#
Output Figure 12-1: Example output from the show flowcontrol interface command
Port Send FlowControl
admin
----- ------- --------
port1.0.5 on
613-50137-01 Rev A
Parameter Description
<port>
Specifies the name of the port to be displayed.
show flowcontrol interface port1.0.5
for a specific interface
Receive
oper admin
------- --------
on on
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
FlowControl RxPause TxPause
oper
------- -------
on 0 0
376