Spark Arrester; Muffler Removal; Muffler Inspection; Muffler Installation - Can-Am Renegade 570 2016 Service Manual

Subsection 03 (EXHAUST SYSTEM)
GENERAL
WARNING
Never touch exhaust system components im-
mediately after the engine has run.
PROCEDURES

SPARK ARRESTER

For spark arrester servicing, refer to
MAINTENANCE PROCEDURES
MUFFLER

Muffler Removal

1. Loosen exhaust pipe clamp.
smr2012-011-005_a
1. Muffler
2. Loosen clamp
2. Remove muffler retaining bolts.
smr2012-011-004_a
REAR VIEW
1. Muffler
2. Remove bolts
2
3. Refer to
PERIODIC
subsection.
vmr2012-011-007_d
1. Brace
2. Remove fasteners
4. Remove muffler.

Muffler Inspection

Check muffler and cover for cracks or other dam-
ages. Replace if necessary.
Check if the rubber support is brittle, hard or oth-
erwise damaged. Replace if needed.

Muffler Installation

For the installation, reverse the removal proce-
dure. However, pay attention to the following.
Install new exhaust gasket.
Refer to
braces.
NOTE: Loosely install all fasteners before tighten-
ing.
vmr2012-011-007_d
1. Brace
2. Secure fasteners
BODY
and remove both rear bumper
braces.
BODY and install both rear bumper
vmr2016-401