Tightening Torque - Can-Am Renegade 570 2016 Service Manual

TIGHTENING TORQUE

Tighten fasteners to the torque specified in the exploded view(s) and/or in the written procedure. When
a torque is not specified, refer to the following table.
Torque wrench tightening specifications must be strictly adhered to.
Locking devices must be replaced when removed (e.g.: locking tabs, elastic stop nuts, self-lock-
ing fasteners, cotter pins, etc.).
In order to avoid a poor assembly, tighten screws, bolts, or nuts in accordance with the following proce-
dure:
1. Manually screw in all screws, bolts and/or nuts.
2. Apply half the recommended torque value.
3. Tighten fastener to the recommended torque value.
NOTICE
Be sure to use the recommended tightening torque for the specified fastener used.
NOTE: Whenever possible, always apply torque on the nut.
NOTE: Always torque screws, bolts and/or nuts using a crisscross pattern when multiple fasteners are
used to secure a part (eg. a cylinder head). Some parts must be torqued according to a specific sequence
and torque pattern as detailed in the installation procedure.
4.8
Property
class and
head
markings
5
Property
class and
nut
markings
A00A8BS
FASTENER
SIZE
5.8 Grade
1.5 – 2 N•m
M4
(13 – 18 lbf•in)
3 N•m - 3.5 N•m
M5
(27 lbf•in - 31 lbf•in)
6.5 N•m - 8.5 N•m
M6
(58 lbf•in - 75 lbf•in)
M8 15 N•m (133 lbf•in)
M10 29 N•m (21 lbf•ft)
M12 52 N•m (38 lbf•ft)
M14 85 N•m (63 lbf•ft)
vmr2016-426
WARNING
8.8 9.8
4.8 8.8 9.8
4.8 8.8 9.8
8
FASTENER GRADE/TORQUE
8.8 Grade
2.5 – 3 N•m
(22 – 27 lbf•in)
4.5 N•m - 5.5 N•m
(40 lbf•in - 49 lbf•in)
8 N•m - 12 N•m
(71 lbf•in - 106 lbf•in)
25 N•m (18 lbf•ft)
48 N•m (35 lbf•ft)
85 N•m (63 lbf•ft)
135 N•m (100 lbf•ft)
INTRODUCTION
10.9
10.9
10.9
10
10.9 Grade
3.5 N•m - 4 N•m
(31 lbf•in - 35 lbf•in) (35 lbf•in - 44 lbf•in)
7 N•m - 8.5 N•m
(62 lbf•in - 75 lbf•in) (71 lbf•in - 89 lbf•in)
10.5 – 15 N•m
16 N•m (142 lbf•in)
(93 – 133 lbf•in)
32 N•m (24 lbf•ft)
61 N•m (45 lbf•ft)
105 N•m (77 lbf•ft)
170 N•m (125 lbf•ft) 200 N•m (148 lbf•ft)
12.9
12.9
12.9 12.9
12
12.9 Grade
4 N•m - 5 N•m
8 N•m - 10 N•m
40 N•m (30 lbf•ft)
73 N•m (54 lbf•ft)
128 N•m (94 lbf•ft)
VII