Drive Belt; Cvt Cover Drain Screw; Valve Adjustment; Spark Arrester - Can-Am Renegade Operator's Manual

Remove seat and central panel.
Release clamps and remove air filter
box cover.
vmo2006-007-027_a
1. Release clamps
Loosen clamp and remove air filter.
vmo2006-007-028_a
1. Clamp
2. Air filter
Cleaning
Pour cleaning solution (P/N 219 700
341) or an equivalent into a bucket.
Put the filter in to soak.
While filter soaks, clean inside the air
filter housing.
Rinse the filter with warm water until
all cleaning solution disappears.
Then, let the filter dry completely.
Installation
Properly reinstall removed parts in the
reverse order of their removal.

Drive Belt

See an authorized Can-Am dealer to
check the width and the condition of
drive belt.

CVT Cover Drain Screw

Any time you suspect that water has
entered the CVT cover, drain the CVT
housing by removing the drain screw.
vmr2006-021-007_b
BEHIND LH FOOTREST
1. Drain screw

Valve Adjustment

See an authorized Can-Am dealer for
valves adjustment.
Insufficient clearance will cause loss
of power and possibly damage the
valves.
cause noise.

Spark Arrester

The muffler must be periodically
purged of accumulated carbon.
_____________________
Excessive clearance will
105