Air Filter Housing Removal - Can-Am Renegade 570 2016 Service Manual

Subsection XX (AIR INTAKE SYSTEM)
GENERAL
NOTICE
Never modify the air intake system.
Otherwise, engine performance degradation
or damage can occur. The engine is calibrated
to operate specifically with these components.
PROCEDURES
AIR FILTER
For air filter servicing, refer to
TENANCE PROCEDURES
AIR FILTER HOUSING

Air Filter Housing Removal

1. Remove front body module. Refer to
subsection.
2. On applicable models, remove the following
plastic rivets.
vmr2012-013-005_a
TYPICAL
1. Plastic rivets
3. On applicable models, move dashboard support
toward front.
2
PERIODIC MAIN-
subsection.
BODY
vmr2012-033-001_a
TYPICAL
1. Dashboard support
4. Remove screws securing CVT air inlet to air fil-
ter housing.
vmr2012-010-002_a
TYPICAL
1. CVT air inlet screws
5. Remove ECM retaining screws.
vmr2012-010-001_a
1. ECM retaining screws
6. Disconnect both engine harness connectors
(HIC).
vmr2013-010