Updating Electronic Module (Ecu) Software - Can-Am Renegade 570 2016 Service Manual

Subsection 03 (COMMUNICATION TOOLS AND B.U.D.S.)
tmr2015-028-003_a
TYPICAL - SUCCESSFUL CONNECTION
1. Connection protocol
2. Number of modules read
MODEL NUMBER OF MODULES
Models without
(ECM and multifunction gauge)
DPS
Models with
(ECM, DPS and multifunction
DPS
If the number is less than indicated in
OF MODULES
table, refer to
ING
in this subsection.
5. Read the ECUs by clicking the Read Data but-
ton.
vmr2006-012-100_aen
B.U.D.S. is now ready to use.
Updating Electronic Module (ECU)
Software
NOTICE
Failure to strictly follow a procedure
to update a module may permanently damage
the module.
Whenever B.U.D.S. is first connected to a vehicle,
check for an update icon in the status bar at the
bottom of the Vehicle page.
4
2
3
gauge)
NUMBER
TROUBLESHOOT-
smr2010-030-002_a
TYPICAL
If the update icon is visible, B.U.D.S. indicates that
a file is available to update at least one of the elec-
tronic modules:
NOTE: If an update file is available on
EDGE CENTER but the B.U.D.S. software being
used is not up to date, the update icon will not ap-
pear. Refer to the SERVICE BULLETINS
there is an update available.
Use the Module submenu and check all modules
one at a time to see which module(s) can be up-
dated.
lmr2010-019-001
TYPICAL - MODULE SUBMENU LIST
1. If the Update option is greyed out, no update
file is available for this module.
2. If the Update option is black, an update file is
available for this module.
KNOWL-
to see if
vmr2016-128