Inspecting The Output Shaft And Coupling Mechanism - Can-Am Renegade 570 2016 Service Manual

Subsection 13 (GEARBOX AND 4X4 COUPLING UNIT (WITH EXTERNAL SWITCHES))
vmr2012-019-009_a
1. Output shaft
2. Coupling sleeve
3. Soft hammer
6. Remove:
– Coupling sleeve
– O-ring
– Ball bearing
– Thrust washer.
vmr2006-022-024_a
1. Coupling sleeve
2. O-ring
3. Ball bearing
4. Thrust washer
7. Remove:
– Ball bearing
– Thrust washer.
vmr2016-422
vmr2012-019-010_a
1. Ball bearing
2. Thrust washer
3. Distance ring
8. Remove:
– Screw
– Pin
– Coupling fork.
vmr2015-036-002_a
1. Screw
2. Pin
3. Coupling fork
Inspecting the Output Shaft and
Coupling Mechanism
Check output shaft and its gear for cracks, bend,
pitting or other visible damages.
Check output shaft splines for wear or other dam-
ages.
NOTICE
Always replace output shaft and
bevel gear shaft at the same time. Adjust
these components upon replacement.
Check if the output shaft ball bearings turn freely
and smoothly. Replace if necessary, refer to
GEARBOX ADJUSTMENT
in this subsection.
15