Can-Am Renegade 570 2016 Service Manual page 236

Subsection 13 (GEARBOX AND 4X4 COUPLING UNIT (WITH GBPS))
Tmr2011-016-013_a
1. Countershaft oil seal
2. Distance sleeve
Tmr2011-016-014_a
1. Distance sleeve
2. O-ring
Install countershaft oil seal tool.
REQUIRED TOOL
COUNTERSHAFT OIL SEAL
PUSHER (P/N 529 036 222)
12
vmr2012-020-005_a
1. Countershaft oil seal
2. Oil seal pusher
Shift Shaft Oil Seal
The shift shaft oil seal can be removed without
removing the gearbox from the vehicle.
To replace the shift shaft oil seal, refer to
and remove:
– Seat
– Console
– RH side panel
– RH footrest panel
– Shift plate from shift shaft (refer to
Use a suitable tube with the proper diameter to
install the oil seal.
If gearbox housing is apart, use following tools for
shift shaft oil seal installation.
REQUIRED TOOL
OIL SEAL INSTALLER
(GEARBOX) (P/N 529 035 758)
HANDLE (P/N 420 877 650)
NOTICE
Oil seal must be installed with seal-
ing lip toward gearbox.
Shift Drum Shaft Oil Seal
To replace the shift drum shaft oil seal, remove
GBPS (GEARBOX POSITION SENSOR)
the
procedure in this subsection.
Use a suitable tube with the proper diameter to
install the oil seal.
NOTICE
Oil seal must be installed with seal-
ing lip toward gearbox.
Output Shaft Oil Seal
To replace the output shaft oil seal, proceed as fol-
lows:
BODY
SHIFTER
).
. See
vmr2016-424