Removing The Camshaft Timing Gear - Can-Am Renegade 570 2016 Service Manual

Subsection 09 (TIMING CHAIN)
tmr2013-069-006_a
1. Plug
2. Slot
3. Spring
4. Spring end
5. O-Ring
7. Fit the spring on the other side into the plunger.
NOTE: Turn spring only clockwise in order to fit
the spring end into the notch of the plunger to
avoid loosening the plunger during spring installa-
tion. Do not preload the spring.
tmr2013-069-007_a
FOR CLARITY PARTS ARE REMOVED FROM CYLINDER
1. Plunger
2. Notch
3. Spring
4. Spring end
5. Plug with O-ring
8. Then compress the spring and screw the plug
in.
NOTE: To avoid overstressed timing chain, the
plug must engage into threads within the first full
turn.
4
tmr2013-069-008_a
Step 1: Compress spring
Step 2: Screw in plug
9. Remove locking tool and install all other re-
moved parts.
10. Tighten the chain tensioner screw plug to
specification.
TIGHTENING TORQUE
Chain tensioner plug
CAMSHAFT TIMING GEARS

Removing the Camshaft Timing Gear

1. Remove valve cover, refer to
tion.
2. Set applicable piston to TDC ignition and lock
magneto flywheel. Refer to
ING in this subsection.
3. Remove timing chain tensioner. Refer to
ING CHAIN TENSIONERS
4. Remove camshaft
screws.
4.5 N•m ± 0.5 N•m
(40 lbf•in ± 4 lbf•in)
TOP END
subsec-
CAMSHAFT TIM-
TIM-
in this subsection.
timing gear retaining
vmr2016-420