Shift Shaft Oil Seal; Output Shaft Oil Seal - Can-Am Renegade 570 2016 Service Manual

Subsection 13 (GEARBOX AND 4X4 COUPLING UNIT (WITH EXTERNAL SWITCHES))
vmr2012-019-007_a
1. Countershaft oil seal
2. Oil seal pusher

Shift Shaft Oil Seal

The shift shaft oil seal can be removed without
removing the gearbox from the vehicle.
To replace the shift shaft oil seal, refer to
subsection and remove:
– Seat
– Console
– RH side panel
– RH footrest panel
– Shift plate from shift shaft (refer to
subsection.
Using a suitable tube with the proper diameter to
install the shift shaft oil seal.
If gearbox housing is apart, the following tools can
be used for shift shaft oil seal installation.
REQUIRED TOOL
OIL SEAL INSTALLER
(GEARBOX) (P/N 529 035 758)
HANDLE (P/N 420 877 650)
NOTICE
Oil seal must be installed with seal-
ing lip toward gearbox.

Output Shaft Oil Seal

Remove propeller shaft. Refer to
subsection.
Punch a sharp screwdriver through oil seal for re-
moval.
NOTE: When oil seal is removed also inspect
O-ring.
12
vmr2012-019-008_a
1. Distance sleeve
2. O-ring
BODY
SHIFTER
vmr2006-022-007_a
1. Shift shaft oil seal
2. Output shaft oil seal
For output shaft oil seal installation use the follow-
ing service tool.
DRIVE SHAFT OIL SEAL
INSTALLER (P/N 529 036 028)
REAR DRIVE
REQUIRED TOOL
vmr2016-422