Front Propeller Shaft Removal - Can-Am Renegade 570 2016 Service Manual

Section 06 DRIVE SYSTEM
Subsection 01 (FRONT DRIVE)
TIGHTENING TORQUE
M8 nut securing front
differential to frame
M10 nuts securing front
differential to frame
Install NEW Oetiker clamps.
Refill front differential with recommended oil. Re-
PERIODIC MAINTENANCE PROCEDURES
fer to
subsection.
FRONT PROPELLER SHAFT

Front Propeller Shaft Removal

1. Lift and support vehicle.
2. Remove front wheel. Refer to
TIRES subsection.
3. Remove inner fender panel(s). Refer to
subsection.
4. Remove bolts securing front differential to
frame.
vmr2012-036-004_a
1. Bolts securing front differential to frame
5. Remove the following Oetiker clamps from
front propeller shaft.
474
24.5 N•m ± 3.5 N•m
(18 lbf•ft ± 3 lbf•ft)
61 N•m ± 9 N•m
(45 lbf•ft ± 7 lbf•ft)
WHEELS AND
BODY
vmr2012-009-020_a
1. Oetiker clamps
6. Detach front propeller shaft from front differen-
tial by moving it rearward.
vmr2012-036-005_a
FRONT PROPELLER SHAFT MOVED REARWARD
7. Pry front differential upwards to make room.
vmr2012-036-007_a
1. Pry bar
8. Remove front propeller shaft by pulling it for-
ward.
vmr2015-138