Can-Am Renegade 570 2016 Service Manual page 261

Subsection 16 (SHIFTER (GEARBOX WITH GBPS))
WARNING
After adjustment, make sure that PARK posi-
tion works properly.
SHIFT PLATE
Shift Plate Removal
NOTE: Do not remove shift plate needlessly.
1. Place shift lever in NEUTRAL position.
BODY
2. Refer to subsection and remove the RH
engine cover.
3. Remove shift rod from shift plate.
vmr2012-021-008_a
1. Remove nut
4. Trace an index mark on shift plate and shift
shaft.
vmr2012-021-008_b
1. Trace a mark on both parts
5. Remove shift plate nut and bolt.
4
vmr2012-021-008_c
1. Shift plate nut
6. Remove shift plate.
Shift Plate Inspection
Check shift plate for:
– Cracks
– Bending
– Spline condition.
Shift Plate Installation
The installation is the reverse of the removal pro-
cedure. However, pay attention to the following.
Place gearbox in NEUTRAL position before shift
plate installation.
Position shift plate with the marking "ATV OUT"
visible outward.
Align shift plate using marks previously traced.
If there is no mark, adjust shift plate as per follow-
ing illustrations.
vmr2012-021-010_a
1. "ATV OUT" marking this side
A. 34°
vmr2016-407