tmr2011-011-050_a
1. Inner part of rotary seal
vbs2008-011-005
TYPICAL - INNER PART OF ROTARY SEAL REMOVED
3. Carefully bend down the outer part of rotary
seal lip using a small chisel.
12
tmr2011-011-051_a
1. Small chisel
4. Use 2 screwdrivers and carefully remove the
outer part of the rotary seal.
tmr2011-011-052_a
1. Screwdrivers
NOTICE
Be careful not to damage the
crankcase while removing outer part of the
rotary seal.
vmr2016-417