Inspecting The Front Differential Oil Seals; Verifying The Rear Final Drive Oil Level; Replacing The Rear Final Drive Oil - Can-Am Renegade 570 2016 Service Manual

vmr2016-107-001_a
RH SIDE OF VEHICLE
NOTE: Allow enough time for oil to flow out.
6. Install and tighten drain plug to specification.
TIGHTENING TORQUE
Drain plug
7. Refill front differential with recommended oil.
CAPACITY
500 ml (17 U.S. oz)
75W 90 (API GL-5) gear oil
8. Reinstall filler plug with a NEW sealing washer.
9. Tighten filler plug to specification.
TIGHTENING TORQUE
Filler plug
Inspecting the Front Differential Oil
Seals
Visually inspect oil seals for leak. Replace if re-
quired.

Verifying the Rear Final Drive Oil Level

1. Ensure vehicle is on a level surface.
2. Clean filler plug area.
3. Remove filler plug.
vmr2016-400
Subsection 02 (PERIODIC MAINTENANCE PROCEDURES)
2.5 N•m ± 0.5 N•m
(22 lbf•in ± 4 lbf•in)
RECOMMENDED OIL
XPS SYNTHETIC
GEAR OIL (75W 90)
(P/N 293 600 043) or a
22.5 N•m ± 2.5 N•m
(17 lbf•ft ± 2 lbf•ft)
tmr2011-032-006_a
LH REAR SIDE OF VEHICLE
1. Filler plug
4. Verify the oil level by inserting a wire with a 90°
bend through the oil filler hole.
5. Oil level must be within the following specifica-
tion from the bottom of oil filler hole.
OIL LEVEL
20 mm ± 5 mm (9/16 in ± 3/16 in)
6. Reinstall filler plug with a NEW sealing washer.
TIGHTENING TORQUE
Filler plug

Replacing the Rear Final Drive Oil

1. Ensure vehicle is on a level surface.
2. Clean filler and drain plug areas.
3. Place a drain pan under rear final drive.
4. Unscrew filler plug.
5. Remove drain plug.
tmr2011-032-006_b
LH REAR SIDE OF VEHICLE
1. Drain plug
2. Filler plug
NOTE: Allow enough time for oil to flow out.
6. Install drain plug.
22.5 N•m ± 2.5 N•m
(17 lbf•ft ± 2 lbf•ft)
17