Brakes; Inspecting The Front Suspension Arm; Inspecting The Rear Suspension Arm; Inspecting And Lubricating The Rear Stabilizer Bar Bushings - Can-Am Renegade 570 2016 Service Manual

Subsection 02 (PERIODIC MAINTENANCE PROCEDURES)
vmr2012-040-013_a
TYPICAL
1. Grease fittings

Inspecting the Front Suspension Arm

1. Check suspension arm for:
– Cracks
– Pitting
– Bending
– Distortion.
2. Check suspension arm for abnormal play:
– Side to side
– Up and down.
3. If any play is detected, inspect:
– Wear plates
– Bushings
– Sleeves.
4. Check ball joint for:
– Damage
– Pitting
– Play.
5. Check ball joint bellows for:
– Damage
– Cracks.

Inspecting the Rear Suspension Arm

1. Check suspension arm for:
– Cracks
– Pitting
– Bending
– Distortion.
2. Check suspension arm for abnormal play:
– Side to side
– Up and down.
3. If any play is detected, inspect:
– Spacers
20
– Bearings
– Inner spacers.
4. Check ball joint for:
– Damage
– Pitting
– Play.
5. Check ball joint bellows for:
– Damage
– Cracks.
Inspecting and Lubricating the Rear
Stabilizer Bar Bushings
Inspecting the Rear Stabilizer Bar Bushings
Inspect bushings for:
– Cracks
– Damage
– Abnormal wear.
Lubricating the Rear Stabilizer Bar Bushings
Lubricate bushings at grease fittings.
LUBRICATION
Stabilizer bar bushing
vmr2012-041-018_a
TYPICAL
1. Grease fittings

BRAKES

Recommended Brake Fluid
Always use brake fluid meeting the specification
DOT 4 only such as the
or an equivalent.
(P/N 293 600 131)
WARNING
To avoid damage to the braking system, do
not use other brake fluid types.
SUSPENSION GREASE
(P/N 293 550 033)
BRAKE FLUID GTLMA DOT4
vmr2016-400