Chapter 2: English; Before You Begin; Installing The Switch On A Table Or Shelf - Avaya 5600 Series Regulatory Information

Chapter 2: English

Before you begin

Ensure the area where you install and use the Avaya ERS 5600 Series switch meets the
following environmental requirements:
• Ambient temperature between 32° and 106° F (0° and 50° C)
• Relative humidity between 10% and 90% noncondensing
• No nearby heat sources such as hot air vents or direct sunlight
• No nearby sources of severe electromagnetic noise
• No excessive dust
• Adequate power source within six feet; one circuit required for each power supply (see
table, AC and DC power specifications)
• At least 2 inches (5.08 cm) on each side of the switch unit for ventilation
• Adequate space at the front and rear of the switch for access to cables
If you are installing a single Avaya Ethernet Routing Switch on a table or shelf, ensure the
surface can support at least 21 to 33 pounds (9.5 to 15 kilograms).

Installing the switch on a table or shelf

You can install a single Avaya Ethernet Routing Switch on any flat surface that can safely
support the weight of the switch and attached cables (21 to 33 pounds or 9.5 to 15 kilograms).
The following figures provide instructions for installing the switch on a table or shelf.
Avaya Ethernet Routing Switch 5600 Series Regulatory Information December 2010 15