2. Rack-mounting hardware that includes:
• Rack-mount brackets
• Screws to attach brackets to the switch
• Screws to attach the switch to the equipment rack
3. Rubber footpads
4. AC power cord with an IEC 60320 C16 connector.
Note:
A power cord is not included for the A variant of the switch.
5. Documentation that includes the following:
a. Locating the latest software and product release notes for Avaya Virtual Services
Platform 4000 Series, NN46251-106
b. Avaya Virtual Services Platform 4000 Series Regulatory Guide, NN46251-105
c. Avaya Virtual Services Platform 4000 Series 4450GSX Quick Install Guide,
NN46251-303
d. The China RoHS paper
Installing the Avaya Virtual Services Platform 4000 on a
table or shelf
You can install a single Avaya VSP 4000 switch on any flat surface. The surface must support the
combined weight of the switch and attached cables (from 15 and 20 pounds [7 to 9 kilograms]).
Note:
A factory-supplied 4450GSX series switch has a USB port but no USB device or cover.
To install an Avaya VSP 4000 on a table or shelf, perform this procedure.
1. Attach the included rubber footpads on the bottom of the switch at the locations indicated.
November 2016
Installing the Avaya Virtual Services Platform 4000 on a table or shelf
Installing Avaya Virtual Services Platform 4450GSX-PWR+ Switch
Comments on this document? infodev@avaya.com
21