Clear Dynamic Vlans; Clear Event-Log; Clear Interface - Avaya P460 Reference Manual

clear dynamic vlans

User level: read-write, admin.
Use the clear dynamic vlans command to clear dynamically learned VLANs.
Only the VLANs learned by the switch from incoming traffic are cleared using this
command.
The syntax for this command is:
clear dynamic vlans
Example:
P460-1# clear dynamic vlans
This command will delete all the vlans that were
dynamically learned by the device - do you want to continue
(Y/N)? y
Dynamic vlans were deleted from device tables

clear event-log

User level: read-write, admin.
Use the clear event-log command to delete the log file of a Supervisor module.
The syntax for this command is:
clear event-log [<module_number>]
spv_num
(Optional)
Example:
P460-1# clear event-log
*** Clearing the reset file ***
- do you want to continue (Y/N)? y
P460-1#

clear interface

User level: read-write, admin.
Use the clear interface command to clear the inband or outband interface
from the NVRAM.
Avaya P460 Reference Guide
Number of Supervisor Module (1...2)
Chapter 2 Avaya P460 CLI Commands
17