Table of Contents
Advertisement
Chapter 3
appletalk zone
Command Mode
Description
Syntax
Sample Output
Systems
3-14
Interface Configuration.
Adds an Appletalk zone name to an interface. The no form of this command
removes a specifically named zone name from an interface, or all zone
names, if no zone name is specified. The first zone added is the default
zone. This command can be issued, as needed, to assign additional zone
names to an interface.
To Enable:
appletalk zone [<zone-name>]
To Disable:
[no] appletalk zone
Table 3-10. Parameters, Keywords, Arguments
Name
Definition
<zone-name>
The name of the zone you want to add to the interface. The
first zone added is the default zone.
The following example adds Appletalk zone "foo2" to the "auto50"
interface.
(config-if:auto50)# appletalk zone foo2
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Advertisement
Table of Contents
