Display Bgp Peer Ipv4 Vpn-Instance - HP 6125XLG Command Reference Manual

Field
Type
Maximum allowed prefix number
Threshold
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down

display bgp peer ipv4 vpn-instance

Use display bgp peer ipv4 vpn-instance to display information about BGP peers.
Syntax
display bgp peer ipv4 vpn-instance vpn-instance-name [ group-name log-info | ip-address { log-info |
verbose } | verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies the name of a VPN instance, a string of 1 to 31 case-sensitive
characters.
ip-address: Specifies the IP address of a peer. If no peer is specified, this command displays all peers.
verbose: Displays detailed information.
group-name: Specifies the name of a peer group, a string of 1 to 47 case-sensitive characters.
log-info: Displays log information for the specified peer or peer group.
Usage guidelines
If no parameters are specified, this command displays brief information about all BGP peers in the
specified VPN.
Examples
# Display information about the BGP peers for the VPN instance vpn1.
<Sysname> display bgp peer ipv4 vpn-instance vpn1
BGP local router ID : 2.2.2.2
Local AS number : 100
Total number of peers : 1
Description
Peer group type, external or internal.
Maximum number of routes that the VPN instance supports.
Threshold value.
If the threshold is reached, the device generates prompt information.
Number of messages received.
Number of messages sent.
Number of messages waiting to be sent to the peer.
Number of prefixes received.
Duration of the BGP session in the current state.
Peers in established state : 1
3