Filter-Policy Import (Ipv6 Address Family View) - HP 6125G Command Reference Manual

Layer 3 - ip routing
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

process-id: Process ID of the routing protocol, in the range of 1 to 65535. It is available only when the
protocol is ospfv3 or ripng.
Description
Use filter-policy export to filter outbound routes using a specified filter.
Use undo filter-policy export to cancel filtering outbound routes.
By default, no outbound routing information is filtered.
If a protocol is specified, only routes redistributed from the specified protocol are filtered. If no protocol
is specified, all redistributed routes will be filtered.
If you want to reference an advanced ACL (with a number from 3000 to 3999) in the command, the ACL
should be configured with the rule [ rule-id ] { deny | permit } ipv6 source sour sour-prefix command to
deny/permit a route with the specified destination, or with the rule [ rule-id ] { deny | permit } ipv6 source
sour sour-prefix destination dest dest-prefix command to deny/permit a route with the specified
destination and prefix. The source keyword specifies the destination address of a route and the
destination keyword specifies the prefix of the route (the prefix must be valid; otherwise, the configuration
is ineffective).
Examples
# Reference ACL6 2001 to filter all outbound IPv6 BGP routes.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] filter-policy 2001 export
# Configure ACL6 3000 to permit only route 2001::1/128 to pass, and reference ACL6 3000 to filter
outbound routes.
<Sysname> system-view
[Sysname] acl ipv6 number 3000
[Sysname-acl6-adv-3000] rule 10 permit ipv6 source 2001::1 128 destination
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 128
[Sysname-acl6-adv-3000] rule 100 deny ipv6
[Sysname-acl6-adv-3000] quit
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] filter-policy 3000 export

filter-policy import (IPv6 address family view)

Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } import
undo filter-policy import
View
IPv6 address family view
Default level
2: System level
299

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents