10-Jul-2008 15:46:17 Down
10-Jul-2008 09:23:00 Up
10-Jul-2008 07:46:17 Down
10-Jul-2008 06:23:00 Up
10-Jul-2008 05:46:17 Down
Table 71 Command output
Field
Peer
Date
Time
State
Notification
Error/SubError
display bgp ipv6 peer received ipv6-prefix
Syntax
display bgp ipv6 peer { ip-address | ipv6-address } received ipv6-prefix [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ip-address: IP address of a BGP peer.
ipv6-address: IPv6 address of a BGP peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Send Notification with Error 1/1
Message Header Error/Connection Not Synchronized
Receive Notification with Error 3/2
UPDATE Message Error/Unsupported optional Parameter
Send Notification with Error 6/4
Administrative Reset
Description
IPv6 address of the peer.
Date on which the Notification was sent or received.
Time at which the Notification was sent or received.
BGP session state, which can be:
•
Up—Indicates the BGP session is up.
•
Down—Indicates the BGP session is down.
Notification message.
•
Error—Refers to the error code, which identifies the type of the Notification.
•
SubError—Refers to the error subcode of the Notification, which identifies the specific
information about the reported error.
286