Task
and reception
Configuring IPv6 BGP route
attributes
Tuning and optimizing IPv6
BGP networks
Configuring a large-scale IPv6
BGP network
Configuring IPv6 BGP basic functions
Configuration prerequisites
Before you configure IPv6 BGP basic functions, complete the following tasks:
Specify IP addresses for interfaces.
•
•
Enable IPv6 with the ipv6 command in system view.
Configuration guidelines
Create a peer group before configuring basic functions for it. For more information, see
IPv6 BGP peer
Specifying an IPv6 BGP peer
Configuring IPv6 BGP route summarization
Advertising a default route to an IPv6 peer or peer
group
Configuring outbound route filtering
Configuring inbound route filtering
Configuring IPv6 BGP and IGP route
synchronization
Configuring route dampening
Configuring IPv6 BGP preference and default
LOCAL_PREF and NEXT_HOP attributes
Configuring the MED attribute
Configuring the AS_PATH attribute
Configuring IPv6 BGP timers
Configuring IPv6 BGP soft reset
Enabling the IPv6 BGP ORF capability
Enabling 4-byte AS number suppression
Setting the DSCP value for IPv6 BGP packets
Configuring the maximum number of ECMP routes
Enabling MD5 authentication for TCP connections
Configuring IPv6 BGP peer group
Configuring IPv6 BGP community
Configuring an IPv6 BGP route reflector
group."
230
Remarks
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
"Configuring