Display Bgp Vpnv4 Peer Received Ip-Prefix - HP 5800 series Command Reference Manual

10-Jul-2008 15:46:17 Down
10-Jul-2008 09:23:00 Up
10-Jul-2008 07:46:17 Down
10-Jul-2008 06:23:00 Up
10-Jul-2008 05:46:17 Down
Table 121 Command output
Field
Peer
Date
Time
State
Notification
Error/SubError

display bgp vpnv4 peer received ip-prefix

Description
Use the display bgp vpnv4 peer received ip-prefix command to display the IP prefix information of the
ORF packets received from the specified BGP peer.
Syntax
display bgp vpnv4 { all | vpn-instance vpn-instance-name } peer ip-address received ip-prefix [ | { begin
| exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Specifies all VPNv4 peers.
vpn-instance vpn-instance-name: Displays information about the specified VPN. vpn-instance-name is the
instance name of an MPLS L3VPN, which is a case-sensitive string of 1 to 31 characters.
ip-address: Specifies the IP address of the BGP peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
Send Notification with Error 1/1
Message Header Error/Connection Not Synchronized
Receive Notification with Error 3/2
UPDATE Message Error/Unsupported optional Parameter
Send Notification with Error 6/4
Administrative Reset
Description
IPv4 address of the peer
Date when the notification message is sent or received
Time when the notification message is sent or received
Connection state of the peer, which can be:
•
Up—The BGP session is in the Established state.
•
Down—The BGP session has been cut down.
Notification message
Error: Notification message error code, which specifies the error type
SubError: Notification message's error subcode, which specifies the detailed
information of the error
286