Oil Pump - TGB Blade 525 Service Manual

3. LUBRICATION SYSTEM

Oil Pump

Oil Pump Removal
Remove the one way clutch.
Remove the clutch shoe.
Remove the snap ring.
Remove the washer.
Remove the oil pump driver gear.
Caution
The clutch shoe nut has left-hand threads.
Remove the snap ring.
Remove the washer.
Remove the oil pump driver gear.
Remove the pin.
Remove the washer.
Make sure that pump shaft can be rotated freely.
Remove 3 screws on the oil pump, and then
remove oil pump.
Oil Pump Disassembly
Remove the screws on oil pump cover and remove
the cover.
Remove oil pump shaft roller and shaft.
3-4
PDF created with pdfFactory Pro trial version
1 screw
www.pdffactory.com
One way clutch
Snap ring
3 screws
Pin