Cylinder Head Removal - TGB blade 300 Service Manual

6. CYLINDER HEAD/VALVE

Cylinder Head Removal

Remove engine. (Refer to chapter 5)
Remove the inlet pipe (2 nuts).
Remove 1 bolt of thermostat and then remove the
thermostat.
Remove hole bolt and spring for the cam chain
tensioner.
Loosen 2 bolts, and then remove tensioner.
Remove thermostat (2 bolts).
Remove Air Injection system (AI) pipe mounting
bolts.
Remove spark plug.
Remove the side cover mounting blots of cylinder
head, and then take out the side cover.
6-4
PDF created with pdfFactory Pro trial version
To this chapter contents
2 nuts
Tensioner bolts
4 bolts
3 bolts
www.pdffactory.com
Thermostat bolts
Spark plug