Programming; Firmware Updates; Access Control; Ground Fault Detection - Bosch B9512G-E Installation Manual

Control Panels
Event log
The event log stores local and reported events. The event log includes information such as
time, date, event, area, point, and user. View the event log from a keypad or use RPS or the
Installer Services Portal programming tool (available in Europe, Middle East, Africa, and China)
to remotely retrieve event information. When the event log reaches a programmed threshold
of stored events, it can send an optional report to a receiver.
The control panels store up to the following number of events:
–
–
3.3.7

Programming

Use RPS or the Installer Services Portal programming tool (available in Europe, Middle East,
Africa, and China) to program the control panels. You can connect to the control panel using a
network connection (on-board Ethernet port, cellular module, B426 Conettix Ethernet
Communication Module, or telephone module), or locally using the control panel's on-board
Ethernet port or USB port. (To program with the USB port connection, use the B99 USB 2.0
Type A Male to Type A Male cable by Bosch.) You can also use a keypad for select
programming.
Refer to RPS Help, the Installer Services Portal programming tool Help, or the control panel's
Program Entry Guide, and to Keypad Installer menu, page 123 for programming options.
Notice!
After system installation and any control panel programming, perform a complete system test
(a UL 864 requirement). A complete system test includes testing the control panel, all
devices, and communication destinations for proper operation.
3.3.8

Firmware updates

The system can update the firmware remotely:
–
–
3.3.9

Access control

The control panels support up to the following number of modules, cards, and tokens:
Control panel
B9512G
B8512G
3.3.10

Ground fault detection

The earth ground Terminal 10
terminals to allow the control panel to detect ground fault conditions. Ground Fault Detect is
configured in programming.
3.3.11

Dual authentication

With Dual Authentication enabled, the control panel requires two forms of identification
before it processes certain system commands, including turning off the system and opening
doors.
Bosch Security Systems, Inc.
B9512G. 10,192
B8512G. 2,048
Control panel updates. Remotely update the control panel firmware for easy feature
enhancements without replacing ROM chips.
Module update support. Remotely update the firmware on connected SDI2 modules for
easy feature enhancements without visiting each individual module.
B901
32
8
D9210C
8 (combine with B901
for a total of 32)
8 (combine with B901
for a total of 8)
on the control panel is electrically isolated from all other
Installation Manual
System overview | en 19
Cards or token
– B901. 2,000
– D9210C. 999
– B901. 500
– D9210C. 500
2018.07 | 10 | F.01U.303.996