Netlink Primary Compulsion Specification Setting - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100

51-07 : NetLink Primary Compulsion Specification Setting

Level:
IN
Description
Use Program 51-07 : NetLink Primary Compulsion Specification Setting to set
compulsion specification of the Primary system.
Input Data
Item
No.
01
02
Feature Cross Reference
None
Programming Manual
Forced Change Primary System Enabling
Set this item whether the Forced Change
Primary is available or not.
Package Reset Timing Option
When Forced Change Primary System is done,
all packages will reset. This option can select the
timing of package reset.
0 = Reset when all packages are in idle
condition, otherwise reject Primary System
Integration.
1 = Anytime
Conditions
None
Program 51 : NetLink Service
Item Input Data
0 = Disable
1 = Enable
0 = On
1 = Off
Issue 1.0
Default
1
0
2 - 571