Plumbing The Intellistart Fluidics Lockspray System - Waters Xevo G2-XS QTof Overview And Maintenance Manual

6 Maintenance Procedures

Plumbing the IntelliStart Fluidics LockSpray system

This section explains how to plumb the LockSpray system.
Tubing schematic for the LockSpray system:
From external reference
Tubing
guides
Waste port
From pump
Tubing dimensions (LockSpray system):
Port
Connection
number
1 Reservoir bottle A
2 Reservoir bottle B
3 Reservoir bottle C
4 Reference probe
(or Flow sensor if fitted)
5 Waste reservoir
6 Wash reservoir
7 LockSpray selector pump
- Flow sensor to grounded
union (if used)
- Grounded union to reference
probe
226 April 2, 2015, 715004496 Rev. B
Flow sensor (optional)
bottle (optional)
A
B
3
C
From wash bottle
2 1 Grounded union
(optional)
7 6
LockSpray selector valve
4 5
ID OD
(inch) (inch)
0.020 1/16
0.020 1/16
0.020 1/16
0.005 1/32
0.040 1/16
0.020 1/16
0.010 1/16
0.005 1/32
Probe and flow rate dependent.
To reference
probe
Length
Color
(mm)
Orange 680
Orange 680
Orange 680
Red 200
Natural 1,000
Orange 1,000
Blue 300
Red 60