Waters Xevo G2-XS QTof Overview And Maintenance Manual page 233

11. Using a 1/32-inch, Valco component fitting assembly, connect the red,
1/32-inch, 60-mm, PEEK tubing between the flow sensor and the
grounded union, where you use a use a short finger-tight nut and
1/32-inch ferrule.
The narrower, 1/32-inch tubing can slip out of the port. After
Important:
tightening the fitting, gently tug the tubing, to ensure it is secure in the
port.
A
A
B
B
C
C
Short finger-tight nut and 1/32-inch ferrule:
Replacing IntelliStart Fluidics tubing (Standard configuration)
Grounded union
C
B
A
Wa ters
B C
A
April 2, 2015, 715004496 Rev. B 233