Waters Xevo G2-XS QTof Overview And Maintenance Manual page 105

4. Fit the corona pin to its mounting contact, ensuring that the corona pin
is securely mounted and that its tip aligns with the sample-cone orifice.
Corona pin:
5. Close the source enclosure.
6. Look through the source window, and use the vernier probe adjuster (see
the figure on page
approximately midway between the tips of the sample cone and the
corona pin.
59) to position the ESI probe tip so that it is pointing
April 2, 2015, 715004496 Rev. B
Installing and removing the corona pin
Corona pin
Sample-cone
orifice
TP03130
105