Waters Xevo G2-XS QTof Overview And Maintenance Manual page 296

B External Connections
To make signal connections:
1. Determine the signal connection location from the silk-screened label on
the rear panel of each instrument.
2. Attach the positive and negative leads of the signal cable to the
connector.
3. Slide the clamp (with the bend facing down) into the protective shield.
4. Insert the clamp and shield (with the bend facing down) into the
connection cover, and loosely tighten with one self-tapping screw.
296 April 2, 2015, 715004496 Rev. B
Connector
Signal cable
TP02585
Clamp
Shield
TP02586 Connection cover