Waters Xevo G2-XS QTof Overview And Maintenance Manual page 84

5 Installing and removing the ionKey source
Source connections to mass spectrometer:
Options
cable
High voltage
cable
Data/power
cable to PSPI
connector on
µSample
manager
15. Connect the high voltage cable (white) to the high voltage supply outlet
on the mass spectrometer.
16. Connect the reference-probe high voltage cable (green) to the
reference-probe power inlet on the mass spectrometer.
17. Connect the options cable (blue) to the options port on the mass
spectrometer.
84 April 2, 2015, 715004496 Rev. B
Reference-probe
high voltage cable
TP03576