Waters Xevo G2-XS QTof Overview And Maintenance Manual page 86

5 Installing and removing the ionKey source
µSample manager injection valve:
20. Connect the fluid-inlet line to port 6 on the injection valve of the
µSample manager.
21. Connect the fluid-infusion line to port 2 on the diverter valve of the mass
spectrometer.
22. Connect the optional post-column addition (PCA) line to outlet B on the
Auxiliary Solvent Manager (ASM) Flow Control Module.
23. Connect the waste line to a suitable waste container.
24. Connect the reference-probe PEEK capillary to the grounded union
(which is connected to the reference valve on the mass spectrometer).
Rationale:
IntelliStart fluidics.
25. Close the IntelliStart Fluidics system access doors.
26. Power-on the sample manager.
27. Restart the MassLynx software.
ACQUITY UPLC M-Class System Guide (part number 715003588).
See also:
86 April 2, 2015, 715004496 Rev. B
Doing so provides lock-spray operation for the onboard
Fluid-inlet line connected
to injection valve port 6